MCM Acoustical Grooved planks have natural wood veneer laminated to a Class A fire rated perforated black core MDF, a variety of surface grooving options on the face, and an acoustical fibreglass membrane mat on the rear of the planks.
Materials
Leather/Leather Hide
Collection Name
Expressions
Sample Size
4.50 in x 7.80 in
Size
8 ft and 10 ft (2.4 m & 3 m) lengths and are generally cut to size on site; Three standard groove spacing options: 5/16 in (8 mm), 5/8 in (16 mm), and 1 1/4 in (32 mm)
Custom Capabilities
Other veneers are available upon request. If you wish to specify a wood species that is not mentioned on the Finishes page, kindly contact MCM Acoustical to confirm its consistent availability. All veneers can be custom stained. Panels can also be painted
MCM Acoustical's Direct Mounting system is designed to attach ceiling planks directly to ceiling grid / furring channels using MCMA plank clip; Planks weigh between 2 and 4 pounds per square foot, so use heavy-duty C-channels and furring channels; Secure the first plank / starter plank to ceiling substrate; Snap MCMA plank clip @ the grooved edge of the first plank; Screw MCMA plank clips directly to furring channels or other types of substrate like plywood strips; Install the next plank by inserting its tongue edge to the first installed plank groove; Repeat to snap MCMA plank clip @ the grooved edge of the second plank, and so on and so forth; Assembly drawing available in download section
Manufacturer Notes
Like any other architectural natural wood products, all MCM Acoustical products are to be acclimatized inside a controlled interior environment for at least 75 hours before installation. During storage prior to installation, during installation, and after installation the relative humidity level of 35% - 55% and temperature range of 20°-27°C (68°-81°F) must be maintained
The Grooved Planks are Class A fire rated interior wood finish products as per ASTM E84 and CAN/ULC S102 tested in an accredited NVLAP test facility as a finished composite product using Class A components
Acoustics
Grooved Planks and Panels 8 mm = NRC up to 0.95; Grooved Planks and Panels 16 mm = NRC up to 0.90; Grooved Planks and Panels 32 mm = NRC up to 0.70
Stain Resistance
IUF420 - No Staining
Weather Resistance
Townsend LM2 - Minimum 3 on AATCC Grey Scale, No Cracking
We are manufacturers, craftsmen and artisans of leather. We produce all of our leathers in upstate New York, which allows us to offer fast lead times, low minimums, domestic shipping and large in-stock inventory, as well as unlimited opportunities for customization and made-to-order leathers.
Choose the language you’d like to browse the site in.
{
initFormValidation();
});">
Select an Associated Product
Material Bank
Business Intelligence
Term & Conditions
The data contained herein constitutes confidential information of Material Bank, proprietary in nature. You and your organization have access to this information as a result of agreeing to the Standard Terms and Conditions detailed in your Brand Partner Agreement. These terms state this confidential information shall not be distributed or shared with others outside of your organization or with any of your affiliate companies. By proceeding, you acknowledge and agree to use the contained information exclusively as detailed in your Brand Partner Agreement’s Standard Terms and Condition.If you have any question as to the use of this data contact us at brandservices@materialbank.com.
Embossed full-aniline cowhide, hand-rubbed with multiple colors and effects that enhance the distinctive color palette of Asian flavors and spices. This leather has a super hand and good durability, combining the best in aesthetics and performance. The embossed designs have been selected from our most popular patterns and are offered on whole hides without pattern match lines for exceptional cutting yields. The Chain Link pattern is offered only in pre-cut panels 53" x 25" - 3/hide. The characteristic finish effect of this leather artwork is applied by hand; the resulting variance in design and color are part of its natural beauty.
MCM Acoustical's Direct Mounting system is designed to attach ceiling planks directly to ceiling grid / furring channels using MCMA plank clip; Planks weigh between 2 and 4 pounds per square foot, so use heavy-duty C-channels and furring channels; Secure the first plank / starter plank to ceiling substrate; Snap MCMA plank clip @ the grooved edge of the first plank; Screw MCMA plank clips directly to furring channels or other types of substrate like plywood strips; Install the next plank by inserting its tongue edge to the first installed plank groove; Repeat to snap MCMA plank clip @ the grooved edge of the second plank, and so on and so forth; Assembly drawing available in download section
Manufacturer Notes
Like any other architectural natural wood products, all MCM Acoustical products are to be acclimatized inside a controlled interior environment for at least 75 hours before installation. During storage prior to installation, during installation, and after installation the relative humidity level of 35% - 55% and temperature range of 20°-27°C (68°-81°F) must be maintained
The Grooved Planks are Class A fire rated interior wood finish products as per ASTM E84 and CAN/ULC S102 tested in an accredited NVLAP test facility as a finished composite product using Class A components
Acoustics
Grooved Planks and Panels 8 mm = NRC up to 0.95; Grooved Planks and Panels 16 mm = NRC up to 0.90; Grooved Planks and Panels 32 mm = NRC up to 0.70
Stain Resistance
IUF420 - No Staining
Weather Resistance
Townsend LM2 - Minimum 3 on AATCC Grey Scale, No Cracking