Choose the language youād like to browse the site in.
{
initFormValidation();
});">
Select an Associated Product
Material Bank
Business Intelligence
Term & Conditions
The data contained herein constitutes confidential information of Material Bank, proprietary in nature. You and your organization have access to this information as a result of agreeing to the Standard Terms and Conditions detailed in your Brand Partner Agreement. These terms state this confidential information shall not be distributed or shared with others outside of your organization or with any of your affiliate companies. By proceeding, you acknowledge and agree to use the contained information exclusively as detailed in your Brand Partner Agreementās Standard Terms and Condition.If you have any question as to the use of this data contact us at brandservices@materialbank.com.
The X-SEALĀ® Anchor meets or exceeds requirements of the Commonwealth of Massachusetts State Building Code for air leakage and water penetrationThe X-SEALĀ® Veneer Anchor is packed with more features than any other anchor on the market. Owners, architects and masons can be confident in the performance of an inX-SEALED in metal stud / veneer wall. The X-SEALĀ® Anchor is the next generation veneer anchor from H&B. The original DW-10-XĀ® Anchor was developed to address the problem of possible long-term deterioration of the insulation or wallboard. The pronged legs bridge the sheathing and abut the steel stud, affording independent, positive anchorage. Compression of the sheathing by positive loads is also preventedThe X-SEALĀ® Anchor improves upon the DW-10-X by moving the horizontal pronged legs in from each end, enabling the backplate portion of the anchor to effectively seal the wallboard /insulation. This helps to maintain the integrity of the vapor barrier and prevents the ingress of air and moisture through the sheathingThe pronged legs are now also rib-stiffened and oriented closer to each other than on the original DW-10-X, thus enhancing the compressive strength BY OVER 20%!AVAILABLE FINISHES:Hot Dip GalvanizedType 304 Stainless SteelDIMENSIONS:Available in leg lengths from ½ in ā 4-1/2 in (combination of wallboard and or insulation)NOTE:X-SEALĀ® Tape is available for additional protection against air and moisture infiltration