menu Mobile Menu
Flannery, Inc.

Drip Screed

Colorway
Acero
Usage
Commercial, Residential
Delivery
Ships in 1–5+ Days From Brand
Price Range
$
Sku
100325233
Available Sizes:
2 in D x 7/8 in W x 3/4 in H
arrow-up
Description
Flannery’s Drip Screeds create a drip edge for moisture to "drip" off stucco fascia edges preventing it from running back across a soffit. Drip Screeds are typically set at the corner joint where a fascia meets a soffit. They come with a fascia leg that acts as a stucco stop and a reveal which acts as a drip edge.
Architectural
Moulding & Trim/Metal Profiles
Collection Name
Plaster & Stucco Trim
Sample Size
5 in x 5 in
Size
24 in x 24 in, 47 in x 47 in
Series Name
Stucco Stop
Custom Capabilities
Paint colors can be customized
Availability
Typically Stocked
Lead Time
1 Week
Order Increments
Flannery's Aluminum Trims are shipped and stocked in 10-foot lengths unless otherwise specified
Country of Origin
United States
State of Origin
Texas
Product Details
  • Flannery's Plaster & Stucco Trims are standard extruded aluminum alloy 6063 T5 and have a typical 0.050" or greater nominal wall thickness.
  • Extruded Plaster & Stucco Trims are aesthetic trims not intended to hold or support the full weight of any Stucco or Plaster system.
  • Flannery's Trims meet or exceed ASTM B221 for extruded aluminum products.
  • Flannery's Aluminum Trims come in 10" lengths typically and shall have a standard stock finish of Mill Finish (for field priming & painting) or Clear Anodized (some may be stocked in Black Anodized)
Content
Porcelain
Finish
Matte
Construction
Through Body Color
Shade Variation
V3: moderate - high
Format
Modular
Overall Thickness
11.5 mm
Tile Uniformity
Rectified
Recommended Grout
Colorstuk Rapid Gris N
Indoor & Outdoor
Indoor, Outdoor
Applications
Residential Wall, Light Commercial Wall, Heavy Commercial Wall, Facade, Shower Wall, Residential Floor, Light Commercial Floor
Installation
Install all Drip Screeds using full ten-foot lengths wherever possible. Attach Drip Screeds to the framing with nails, screws, or other approved fastening methods. Building paper or the weather resistant barrier must be installed over the vertical attachment flange of the Drip Screed. All plaster trims must be cut accurately and installed with tight, neat joints. All nailing flanges must be covered with lath and all butt joints must be sealed. Manufacturer recommends that a carbide tip blade along with lubricant be used when cutting any aluminum trims. Flannery offers an Aluminum Alignment Splice to ease the installation process and create crisp and clean butt joints and lines for its 7/8 Drip Screed (DS 875-875)
Manufacturer Notes
Flannery's Plaster & Stucco Trims are standard extruded aluminum alloy 6063 T5 and have a typical .050" or greater nominal wall thickness. Extruded Plaster & Stucco Trims are aesthetic trims not intended to hold or support the full weight of any Stucco or Plaster system. Flannery's Trims meet or exceed ASTM B221 for extruded aluminum products. Flannery's Aluminum Trims come in 10" lengths typically and shall have a standard stock finish of Mill Finish (for field priming & painting) or Clear Anodized (some may be stocked in Black Anodized). Other factory finishes, including liquid or powder-coated paint, Chem-Film, Primer and special Anodizing finishes are available
Slip Resistance
Pendulum CL1 Ramp R-9
Climate Impact
LEED Compliant
Human Health Impact
CARB Compliant, Low Emitting/Low VOC
LEED
This product may contribute to LEED credits
End-of-Life Options
100% Recyclable

Flannery, Inc.

Flannery is a family-owned and operated manufacturer of a wide range of aluminum trim products designed to complement interior and exterior walls and ceilings. Flannery is pleased to provide technical assistance and service to enable any builder, architect, or owner to achieve their design goals.
Learn More
Image Flannery, Inc.