Dimensione del campione: 24,1 cm x 24,1 cm x 2,5 cm
Specifiche di base
Informazioni generali
Nome della collezione
Breccia
Nome del colore
Beige
Numero di colore
M168
Codice articolo del produttore
M168122D
Fascia di prezzo
€€€
Nome del prodotto
Crema Oro
Nome della serie
SM Marble
Garanzia
A 2-year limited transferable warranty is offered
Note del Brand
The mixture of color is always carefully controlled and monitored to maintain the highest level of consistency. Although careful steps are taken to insure a high level of color consistency, slight color variations can still occur especially in different lot numbers
Materiale e finitura
Costruzione
Stone is agglomerated with resin and pigments via vibro-compression, casting the ingredients into a slab. Grading and polishing processes follow. Tiles are cut from slabs
Contenuto
4 - 6 % Resin, 94 - 96 % Marble
Finitura
Honed, Polished
Formato
Lastra, Modulare
Lucentezza della superficie
Opaco
Disponibilità e approvvigionamento
Disponibilità
Confermare il livello delle scorte con il commerciale
Città di origine
Volargne
Paese di origine
Italia
Possibilità di personalizzazione
Available in custom colors, tile sizes, particle sizes, textures, and finishes. Waterjet cutting and sublimnation printing are also available for further personalization. For slabs, custom production requires a minimum order of 10,000 sqft. Stair treads/risers, window sills, vanity tops and other pieces are available cut to size
Specifiche tecniche
Stabilità dimensionale
EN 14617-12 tested. Class A (<0.3 mm)
Resistenza agli urti
EN 14617-9: 1.0J - 2.0J (For thickness 12 mm), ≥ 1.5J (For thickness 20 mm, 30 mm)
Spessore complessivo
3
Dimensione
Slab: 305 cm x 124 cm; Tile: 30 cm x 30 cm, 60 cm x 30 cm, 40 cm x 40 cm and 60 cm x 60 cm
Use high-performance cement based monocomponent adhesives for tile installation in areas not subject to significant mechanical and/or thermal stress. When installing tiles larger than 40 x 40cm it is better to use bi-component high performance flexible cement based adhesives (cementitious adhesive and latex). When installing tiles in areas subject to mechanical and/or thermal stress, use polyurethane based bi-component highly flexible adhesives. Refer to Synoptic Chart of the Adhesives for Interior Installation document for information
Substrati adatti
Concrete, CBU, gypsum wall surfaces, exterior-grade plywood, or old terrazzo or ceramic tile in interior spaces
Metriche di prestazione
Resistenza all'usura da abrasione
EN 14617-4: 38 mm - 44 mm
Compressione
EN 14617-15 tested. 90 - 150 MPa
Resistenza elettrica
EN 14617-13 tested. ρs ≥ 10^10 Ω / ρv ≥ 10^8 Ω m
Infiammabilità
EN 13501-1 - A2fl-s1
Resistenza alla flessione
EN 14617-2 tetsted. 10 - 20 MPa
Manutenzione
For daily maintenance, use a damp cloth and a neutral pH detergent. Avoid acidic or highly alkaline detergents. Thoroughly rinse the surface with water and dry with a soft cloth or paper towel. Products specifically designed for natural stone surfaces can also be utilized. For commerical flooring applications, cleaning machines are generally used for large areas. Refer to the Care Instructions document for more information
Assorbimento dell'acqua
EN 14617-1: = 0.25 %
Resistenza agli agenti atmosferici
EN 14617-5 Frost Resistance - KMf25 0.6 - 1.0
Sostenibilità
Salute umana
Impatto sulla salute umana
UL GREENGUARD GOLD, UL GREENGUARD, Basse emissioni / Basso VOC, Conforme REACH, Metodo standard CDPH v1.2-2017
