The mixture of color is always carefully controlled and monitored to maintain the highest level of consistency. Although careful steps are taken to insure a high level of color consistency, slight color variations can still occur especially in different lot numbers
Material y acabado
Construcción
Stone is agglomerated with resin and pigments via vibro-compression, casting the ingredients into a slab. Grading and polishing processes follow. Tiles are cut from slabs
Contenido
4 - 6 % Resin, 94 - 96 % Marble
Acabado
Honed, Polished
Formato
Losa, Modular
Brillo superficial
Mate
Disponibilidad y aprovisionamiento
Disponibilidad
Confirma el nivel de existencias con el representante de ventas
Ciudad de origen
Volargne
País de origen
Italia
Capacidades personalizadas
Available in custom colors, tile sizes, particle sizes, textures, and finishes. Waterjet cutting and sublimnation printing are also available for further personalization. For slabs, custom production requires a minimum order of 10,000 sqft. Stair treads/risers, window sills, vanity tops and other pieces are available cut to size
Especificaciones técnicas
Estabilidad dimensional
EN 14617-12 tested. Class A (<0.3 mm)
Resistencia a los impactos
EN 14617-9: 1.0J - 2.0J (For thickness 12 mm), ≥ 1.5J (For thickness 20 mm, 30 mm)
Espesor total
3
Tamaño
Slab: 305 cm x 124 cm; Tile: 30 cm x 30 cm, 60 cm x 30 cm, 40 cm x 40 cm and 60 cm x 60 cm
Use high-performance cement based monocomponent adhesives for tile installation in areas not subject to significant mechanical and/or thermal stress. When installing tiles larger than 40 x 40cm it is better to use bi-component high performance flexible cement based adhesives (cementitious adhesive and latex). When installing tiles in areas subject to mechanical and/or thermal stress, use polyurethane based bi-component highly flexible adhesives. Refer to Synoptic Chart of the Adhesives for Interior Installation document for information
Sustratos adecuados
Concrete, CBU, gypsum wall surfaces, exterior-grade plywood, or old terrazzo or ceramic tile in interior spaces
Métricas de rendimiento
Resistencia al desgaste por abrasión
EN 14617-4: 38 mm - 44 mm
Compresión
EN 14617-15 tested. 90 - 150 MPa
Resistencia eléctrica
EN 14617-13 tested. ρs ≥ 10^10 Ω / ρv ≥ 10^8 Ω m
Inflamabilidad
EN 13501-1 - A2fl-s1
Resistencia a la flexión
EN 14617-2 tetsted. 10 - 20 MPa
Mantenimiento
For daily maintenance, use a damp cloth and a neutral pH detergent. Avoid acidic or highly alkaline detergents. Thoroughly rinse the surface with water and dry with a soft cloth or paper towel. Products specifically designed for natural stone surfaces can also be utilized. For commerical flooring applications, cleaning machines are generally used for large areas. Refer to the Care Instructions document for more information
Absorción de agua
EN 14617-1: = 0.25 %
Resistencia a la intemperie
EN 14617-5 Frost Resistance - KMf25 0.6 - 1.0
Sostenibilidad
Salud humana
Repercusiones en la salud humana
UL GREENGUARD ORO, UL GREENGUARD, Baja Emisión/Bajo VOC, Conforme con REACH, Método estándar CDPH v1.2-2017
