menu Mobile Menu
3form

Royal Etch (Scale A, Inverse)

Sampled on clear float glass
Usage
Commercial
Delivery
check-mark
FedEx Priority Overnight
Price Range
$$
Sku
LID-1017258
Description
The basics of geometry form this beautifully complex pattern that's ready to be applied to monolithic glass with micro-sandblast etching.
Materials
Glass/Interior Glass
Collection Name
Monolithic Glass
Sample Size
4 in x 4 in
Size
Up to 60in x 120in
Custom Capabilities
Custom select colors and patterns. Personalize surface with 3form Digital Printing
Availability
Made to Order / Special Order
Country of Origin
United States
Content
A single sheet of tempered, etched glass. Two glass types are available. They include clear float glass (green-edged) or low-iron glass (colorless)
Finish
A satin etched finish can be specified to provide diffusion and privacy
Construction
Micro-sandblast etching is used to create subtle surface designs
Opacity
Translucent / Sheer, Transparent
Opacity Level / Openness
Visible light transmittance on 0.25in thick material = 88%. On 0.5in thick material = 84%. Measured using clear float glass with no etched surface patterns
Format
Panel / Sheet
Total Weight
Dependent on material thickness
Overall Thickness
0.1875in , 0.25in , 0.3125in , 0.375in , 0.4375in , 0.5in , 0.5625in , 0.6875in , and 0.8125in
Edge / End
Options include Seamed, Flat, Pencil, Bullnose, Mitered, Beveled, and Waterjet edge profiles
Maintenance
Soak with clean water and soap to loosen dirt and debris. Uniformly apply a mild, non-abrasive commercial window washing solution to the glass surfaces with a brush, strip washer or other non-abrasive applicator. Immediately following the application of the cleaning solution, a squeegee should be used to remove all cleaning solution from the glass surface. Care should be taken to ensure that no metal parts of the cleaning equipment come in contact with the glass surface. Dry the window gaskets and seals to avoid degradation of these materials. Pressure washing at 1,500 psi or less can also be an effective way to remove dirt and debris in exterior applications without coatings. Reseal micro-sandblasted glass periodically to prevent oils and debris soaking into the etch. CRL TPC16 TPC Surface Protector is recommended
Indoor & Outdoor
Indoor
Applications
Use as a writeable surface, partition, or for exterior application. Ideal for scearios where translucency is important. Alternatively, surface can offer visual privacy (diffuse light) if needed, depending on the design
Installation
Can be specified to include holes, notches, cutouts and pattern cuts. Any glass that is tempered will need to be fabricated prior to shipping. Altering tempered glass on-site will result in breakage. The material cannot be heat formed or cold bent and is only sold as flat sheets. It is recommended that the material be installed and handled by an experienced glazier. Refer to Technical Spec for additional information
Flammability
Material is non-combustible. Can be specified in all glazing, interior finish, and light transmitting applications requiring class A performance for flame spread
Classification
Passes ANSI Z97.1 for Safety of Architectural Glazing Materials
Chemical Resistance
Refer to Technical Spec for additional information
Acoustics
ASTM E 90 (Sound Transmission Class) tested. Results of 31 – 36 depending on thickness selection
Performance
Meets the requirements of ANSI Z97.1 Class A and CPSC 16 CFR 1201 Cat II
Hardness
6-7 on the Moh's scale. ASTM C1326 (Koop Hardness) tested. Result of 832,065 lbs/sqin
Sustainability Action Plan
Sustainability Action Plan
Organizational Commitments
Just. Label
Environmental Product Declaration
Product-Specific EPD
EPD Expiration Date
Aug 5, 2029
Global Warming Potential (GWP)
3.81
GWP Functional Unit
kg CO2eq
LCA Optimization Plan
No
Ingredient Disclosure
Health Product Declaration (HPD)
Disclosure/ Certification Expiration Date
Apr 22, 2027
Disclosure Level
100 ppm
75% of Ingredients Disclosed
Yes
Post-Consumer Recycled Content Percentage
0
Post-Industrial Recycled Content Percentage
0
Bio-Based Content Percentage
0
Chemicals of Concern
Formaldehyde Free, Halogenated Flame Retardants Free, PFAS free
Manufacturing Location
Salt Lake City, Utah
End-of-Life Options
100% Recyclable, Manufacturer Take-Back Program

3form

3form brings elevated design and sustainability together with breakthrough translucent materials, making your vision a reality. Our architectural-grade resins and glass offer design flexibility, providing the high-performance attributes and durability needed for commercial and exterior environments.
Learn More
Image 3form