menu Mobile Menu
3form

Horizon Etch

Sampled on low-iron glass
Colorway
Meteorite N59
Usage
Commercial
Delivery
Ships in 1–5+ Days From Brand
Price Range
$$$$
Sku
LID-1015152
Materials
Glass/Interior Glass; Glass/Exterior Glass
Collection Name
Pressed Glass
Sample Size
4 in x 4 in
Size
Up to 48in x 120in . Min imum size available is 8in x 12in
Custom Capabilities
Custom select glass type, colors, patterns, and interlayers. Different glass types, conditions and surface treatments can be specified for the front and the back layers. Monolithic version available by request. Personalize surface with 3form Digital Printing
Availability
Made to Order / Special Order
Lead Time
5 weeks
Country of Origin
United States
Content
Available in clear float glass (green-edged) or low-iron glass (colorless). Either option can be annealed or tempered
Finish
A satin etched finish can be specified to provide diffusion and privacy. A mirrored finish is available on annealed glass
Construction
Decorative polyurethane interlayers are laminated between two glass panels
Format
Panel / Sheet
Total Weight
Dependent on material thickness
Overall Thickness
0.1875in , 0.25in , 0.3125in , 0.375in , 0.4375in , 0.5in , 0.5625in , 0.6875in , and 0.8125in
Edge / End
Options include Seamed, Flat, Pencil, Bullnose, Mitered, Beveled, and Waterjet edge profiles. Not all edge profiles are available on tempered lites. In exterior applications, fully glazed (framed and sealed) designs are highly recommended
Maintenance
Soak with clean water and soap to loosen dirt and debris. Uniformly apply a mild, non-abrasive commercial window washing solution to the glass surfaces with a brush, strip washer or other non-abrasive applicator. Immediately following the application of the cleaning solution, a squeegee should be used to remove all cleaning solution from the glass surface. Care should be taken to ensure that no metal parts of the cleaning equipment come in contact with the glass surface. Dry the window gaskets and seals to avoid degradation of these materials. Pressure washing at 1,500 psi or less can also be an effective way to remove dirt and debris in exterior applications without coatings. Note that pressure washing is not suitable for Pressed Glass panels that have been edge sealed
Indoor & Outdoor
Indoor, Outdoor
Applications
Partitions. Ideal for scearios where translucency is important. Alternatively, surface can offer visual privacy (diffuse light) if needed, depending on the design
Installation
Can be specified to include holes, notches, cutouts and pattern cuts. Corners must have fillets with radii at least 0.3125in. Any glass that is tempered will need to be fabricated prior to shipping. Altering tempered glass on-site will result in breakage. The material cannot be heat formed or cold bent and is only sold as flat sheets. It is recommended that the material be installed and handled by an experienced glazier. Due to the thickness of the lamination, special hardware is required to prevent failure of the panel. This hardware is designed with an adjustable bushing that provides a mechanical stop in order to prevent excess torque and compression on the face of glass. These adjustable hardware components allow glass to be mounted in a vertical application on a wall or with 3form's Versa system. Refer to Technical Spec for additional information
Flammability
Material is non-combustible. Can be specified in all glazing, interior finish, and light transmitting applications requiring class A performance for flame spread
Classification
Passes ANSI Z97.1 for Safety of Architectural Glazing Materials
Lightfastness
Polymeric interlayers are UV stable and resistant to degradation by sunlight. Additionally, they can screen out 99% of UV light. Note that organic interlayers may change in appearance over time due to natural drying processes
Chemical Resistance
Refer to Technical Spec for additional information
Acoustics
ASTM E 90 (Sound Transmission Class) tested. Results of 36 – 38 depending on thickness selection
Performance
Meets the requirements of ANSI Z97.1 Class A and CPSC 16 CFR 1201 Cat II
Hardness
6-7 on the Moh's scale. ASTM C1326 (Koop Hardness) tested. Result of 832,065 lbs/sqin
Climate Impact
Environmental Product Declaration (EPD)
Human Health Impact
CARB Compliant
LEED
May contribute to LEED credits
Sustainability Action Plan
Sustainability Action Plan
Organizational Commitments
Just. Label
Environmental Product Declaration
Product-Specific EPD
EPD Expiration Date
Aug 5, 2029
Global Warming Potential (GWP)
3.81
GWP Functional Unit
kg CO2eq
LCA Optimization Plan
No
Ingredient Disclosure
Health Product Declaration (HPD)
Disclosure/ Certification Expiration Date
May 2, 2027
Disclosure Level
100 ppm
75% of Ingredients Disclosed
Yes
Post-Consumer Recycled Content Percentage
0
Post-Industrial Recycled Content Percentage
0
Bio-Based Content Percentage
0
Chemicals of Concern
Formaldehyde Free, Halogenated Flame Retardants Free, PFAS free
Manufacturing Location
Salt Lake City, Utah
End-of-Life Options
100% Recyclable, Manufacturer Take-Back Program
Open attachment in a new tab Environmental Product Declaration (2029)
Open attachment in a new tab Glass Greenguard Gold
Open attachment in a new tab Glass Type III EPD
Open attachment in a new tab LEVELGLASS Installation Manual
Open attachment in a new tab Laminated Glass Adapter Hardware Review
Open attachment in a new tab Pressed Glass EPD Optimization Report
Open attachment in a new tab Pressed Glass HPD (2027)
Open attachment in a new tab Pressed Glass Just Label (2026)
Open attachment in a new tab Pressed Glass Material Safety Data Sheet (MSDS)
Open attachment in a new tab Pressed Glass Optimized EPD label
Open attachment in a new tab Product Warranty
Open attachment in a new tab Sound Transmission Test
Open attachment in a new tab Spec Sheet
Open attachment in a new tab Versa Glass Integrator

3form

3form brings elevated design and sustainability together with breakthrough translucent materials, making your vision a reality. Our architectural-grade resins and glass offer design flexibility, providing the high-performance attributes and durability needed for commercial and exterior environments.
Learn More
Image 3form