A 10-year limited transferable warranty is offered
Manufacturer Notes
The mixture of color is always carefully controlled and monitored to maintain the highest level of consistency. Although careful steps are taken to insure a high level of color consistency, slight color variations can still occur especially in different lot numbers
Material & Finish
Construction
Stone is agglomerated with resin and pigments via vibro-compression, casting the ingredients into a slab. Grading and polishing processes follow. Tiles are cut from slabs
Available in custom colors, tile sizes, particle sizes, textures, and finishes. Waterjet cutting and sublimnation printing are also available for further personalization. For slabs, custom production requires a minimum order of 10,000 sqft. Stair treads/risers, window sills, vanity tops and other pieces are available cut to size
Technical Specifications
Dimensional Stability
EN 14617-12 tested. Class A (<0.3 mm)
Impact Resistance
EN 14617-9: 2.0J - 3.5J (For thickness 9 mm, 12 mm), ≥ 6.0J (For thickness 20 mm, 30 mm)
Use high-performance cement based monocomponent adhesives for tile installation in areas not subject to significant mechanical and/or thermal stress. When installing tiles larger than 40 x 40cm it is better to use bi-component high performance flexible cement based adhesives (cementitious adhesive and latex). When installing tiles in areas subject to mechanical and/or thermal stress, use polyurethane based bi-component highly flexible adhesives. Refer to Synoptic Chart of the Adhesives for Interior Installation document for information
Suitable Substrates
Concrete, CBU, gypsum wall surfaces, exterior-grade plywood, or old terrazzo or ceramic tile in interior spaces
Performance Metrics
Abrasion Wear Resistance
EN 14617-4: 28 mm - 30 mm
Compression
EN 14617-15 tested. 150 - 250 MPa
Electrical Resistance
EN 14617-13 tested. ρs ≥ 10^10 Ω / ρv ≥ 10^8 Ω m
Flammability
ASTM E84 - Class A
Flexural Strength
EN 14617-2 tetsted. = 65 MPa
Light Blocking
Unknown
Maintenance
For daily maintenance, use a damp cloth and a mild detergent. Thoroughly rinse the surface with water and dry with a soft cloth or paper towel. You can also use products specifically designed for natural stone surfaces.
Water Absorption
EN 14617-1: ≤ 0.10 %
Weather Resistance
EN 14617-5 Frost Resistance - KMf25 0.9 - 1.2
Sustainability
Human Health
Human Health Impact
REACH Compliant, CDPH Standard Method v1.2-2017, Low Emitting/Low VOC, UL GREENGUARD GOLD
