Please note that samples are provided for color and pattern selection purposes only and may not represent the complete system construction.
Warranty
1 year from date of installation
Manufacturer Notes
Stonhard offers a range of multilayered flooring systems, with each layer carefully engineered to meet the specific performance requirements of different applications. Please contact your Stonhard Architectural Design & Engineering representative to review the appropriate system build-up for your project. Stonhard offers a variety of sustainability documentation and certifications, including CDPH compliance certificates, Health Product Declarations (HPDs), and Environmental Product Declarations (EPDs). Please contact your Stonhard Architectural Design & Engineering Representative to obtain copies of the applicable documentation for your project.
Material & Finish
Construction
Components are packaged separately and mixed together on-site
Content
A multi-component system consisting of a urethane resin, curing agent, coarse aggregate, a UV-resistant, aliphatic, polyaspartic urethane grout coat, and a water-based polyurethane coating.
Finish
Stoneseal CF7 - F1
Format
Poured / Liquid
Availability & Procurement
Availability
Typically Stocked
Country Of Origin
United States
State Of Origin
New Jersey
Technical Specifications
Dimensional Stability
ASTM C-531 Thermal Coefficient of Linear Expansion tested. 3.3 x 10-5in./in.°F
Do not attempt to install material if the temperature of the Stonres RTZ-2 components and substrate are not within 65 to 85°F/18 to 30°C. The cure time and application properties of the material are severely affected if the temperatures are outside of this range. Stonres RTZ-2 Mortar material is mixed just prior to use in accordance with prescribed directions. The base material is then screed rake applied or by hand with notched trowel. Additional Part C is broadcasted into the surface immediately after raking/troweling. The material is then spike rolled to help embed the chips as well as provide additional air release and leveling. After a minimum of 20 hours curing time, sand the surface of the RTZ Mortar using the recommended grit sandpapers. Squeegee apply and backroll Stonres Groutcoat with a medium nap roller. After 4 hours of minimum cure time, roller apply Stonseal CF7. After 12 hours of cure, inspect and apply Stonres RTZ Skim Coat as per the directions. Apply a second coat of Stonseal CF7. Allow a minimum of 12 hours of cure before foot traffic and 48 hours before washdown/cleaning procedures commence. (Reference the Stonseal CF7 Product Data for further details.) Note: Two coats of Stonseal CF7 are required for all applications of Stonres RTZ-2. Detailed application instructions can be found in the Stonres RTZ-2 Directions.
Suitable Substrates
Suitable for application over properly prepared concrete, wood or steel surfaces. It is not recommended for use over asphalt, mastic, gypsum-based products, brick, or painted surfaces.
Performance Metrics
Abrasion Wear Resistance
ASTM D-4060, CS-17 tested - 0.03 gm
Color Stability From Heat
ASTM F-1514 tested - 7 days at 158°F/70°C, Delta E
Compression
ASTM F-970 Static Load Limit tested - 0.002 in/0.05 mm , 125 lb/57 kg. load
Flammability
ASTM E-648 tested - Class 1
Hardness
ASTM D-2240, Shore A tested - Result 85
Light Blocking
Complete
Maintenance
For regular maintenance, use Stonkleen DG2 with a mop and bucket or an automatic floor scrubbing machine. Deep cleaning for healthcare environments may require diluted Stonkleen AS9 to remove sanitizing and disinfecting films and residues that are left behind from health code protocols that, over time, will leave heavy build-up and dull the floor. Refer to Floor Cleaning Procedure PDF's for additional information
Tensile Strength
ASTM C-307 tested - 1,200 psi
Sustainability
Human Health
Human Health Impact
Health Product Declaration (HPD)
Climate Health
Climate Impact
Environmental Product Declaration (EPD)
Emissions
VOC emissions tested per ASTM D-2369, Method E. Include 13 g/l from RTZ Mortar, 90 g/l from Stonres Groutcoat, and 47 g/l from Stonseal CF7 (Method C)
Circular Economy
Circular Economy
Environmental Product Declaration (EPD), Health Product Declaration (HPD)
