- Abrasion Wear Resistance
- LD3 3.13 Tested - Minimum 400 Cycles
- Flammability
- Passes FMVSS 302, NFPA 255, UL 723 and ULC-S102. ASTM E84 results vary on substate and adhesive use. Refer to Fire Rating Tech Brief attachment
- Flexural Strength
- Grade 12 Horizontal Postforming Grade (HGP) Outside radius to ½in (12.7mm) and cove radius to 3/16in(4.8mm). Grade 20 Vertical Postforming Grade (VGP) Outside and inside radii to 3/8in(9.5mm).
- Light Blocking
- Complete
- Lightfastness
- LD3 3.3 Tested - Slight Resistance
- Maintenance
- Use a clean, damp, nonabrasive cotton cloth and a mild liquid detergent or household cleaner. Clean the soiled area using a rotating motion. Next, rinse with clean water, using a clean, non-abrasive cotton cloth. Please take care not to flood the laminate, especially near seams, since water can penetrate and cause the substrate to swell. Dry the surface with a soft, clean, non-abrasive cotton cloth
- Stain Resistance
- LD3 3.4 Tested. No effect from reagents 1-10. Moderate effect from reagents 11-15
- Water Resistance
- LD3 3.5 Tested. Grade 10 (HGP) - No Effect. Grade 12 (HGP) and Grade 20 (HGP) - Slight Resistance
