Please note that samples are provided for color and pattern selection purposes only and may not represent the complete system construction.
Warranty
1 Year from date of installation
Manufacturer Notes
Stonhard offers a range of multilayered flooring systems, with each layer carefully engineered to meet the specific performance requirements of different applications. Please contact your Stonhard Architectural Design & Engineering representative to review the appropriate system build-up for your project. Stonhard offers a variety of sustainability documentation and certifications, including CDPH compliance certificates, Health Product Declarations (HPDs), and Environmental Product Declarations (EPDs). Please contact your Stonhard Architectural Design & Engineering Representative to obtain copies of the applicable documentation for your project.
Material & Finish
Content
All materials, including primers, resins, curing agents, finish coats, aggregates and sealants. Refer to Product Data sheet for specifics
Finish
Polished is available in both matte and gloss finishes
Format
Poured / Liquid
Availability & Procurement
Country Of Origin
United States
Custom Capabilities
Custom colors are available upon request
Technical Specifications
Impact Resistance
ASTM D-2794 - 160 in/lbs
Overall Thickness
2
Product Features
Customizable
Applications & Usage
Application Filter
Flooring
Installation
Store all components of Polished between 60 to 85°F/16 to 30°C in a dry area. Avoid excessive heat and do not freeze. The shelf life is 3 years in the original, unopened container
Performance Metrics
Abrasion Wear Resistance
ASTM D-4060, CS-17 - 0.03 gm max. weight loss
Flammability
ASTM E-648 - Class 1
Hardness
ASTM D-2240, Shore D - 85-90
Light Blocking
Unknown
Maintenance
Proper preparation is critical to ensure an adequate bond. The substrate must be dry and free of all wax, grease, oils, fats, soil, loose or foreign materials and laitance. Laitance and unbonded cement particles must be removed by mechanical methods, eg., abrasive blasting or scarifying. Other contaminants may be removed by scrubbing with a heavy-duty industrial detergent (Stonkleen TD9) and rinsing with clean water. The surface must show open pores throughout and have a sandpaper texture. For recommendations or additional information regarding substrate preparation, contact Liquid Elements’ Technical Service Department
Performance
Has a cure rate of 8 hours for a tack-free surface and 24 hours for normal operations (@77°F/25°C)
Water Absorption
ASTM C 413 - < 1%
Sustainability
Human Health
Human Health Impact
Health Product Declaration (HPD), Low Emitting/Low VOC
Climate Health
Emissions
D-2269, Method E - Primer 57 g/L, Undercoat 30 g/L, Sealer 34 g/L
