- Abrasion Wear Resistance
- Tested to standard NEMA/LD 3-2005 for wear resistance. Result of 1,000 cycles
- Antimicrobial Note
- Consider specifiying Aegis Secure (finish code: AS), a specialized antimicrobial finish. For more information, refer to the Technical Bulletin.
- Flammability
- Tested to standard ASTM E84 and CAN/ULC-S102-M. Results dependent on the HPL product type, bonding substrate, and adhesive. See Technical Bulletin for additional information
- Flexural Strength
- NF39 Bending Radius: 10 mm (NEMA/LD 3-2005 3.14) F28 Bending Radius: 7 mm (NEMA/LD 3-2005 3.14)
- Light Blocking
- Complete
- Lightfastness
- Tested to standard NEMA/LD 3-2005 for light resistance. Resulted in no effects
- Maintenance
- Cleaning with a solution of warm water and liquid dishwashing detergent is all that should be required in most cases. Stains may be removed with most non-abrasive household cleaners such as FORMULA 409®, GLASS PLUS® or WINDEX® with AMMONIA D®. Light scrubbing with a soft bristled brush may be necessary to remove stains from the depth of the structure on some textured surfaces. If the stain persists, use a paste of baking soda and water and apply with a soft bristled brush. Stubborn stains that resist any of the above cleaning methods may require the use of undiluted household bleach. Note that prolonged exposure of the laminate surface to bleach will cause discoloration. Avoid abrasives and harsh chemicals
- Stain Resistance
- Stain 1-10 No Effect, Stain 11-15 No Effect (NEMA/LD 3-2005 3.4)
- Water Resistance
- Tested to standard NEMA/LD 3-2005 for boiling water resistance. Resulted in no effects.
