Quartz agglomerate, resin binders, and pigments are blended together. Using the Bretonstone® vacuum vibro-compaction method, the mixture is polymerized and cast into slabs
Content
Up to 93 percent quartz aggregate combined with polyester resin binders and proprietary pigments that are homogeneous, with uniform color throughout their thickness
Finish
Polished
Format
Slab
Surface Sheen
Polished
Availability & Procurement
Availability
Made to Order / Special Order, Typically Stocked
Country Of Origin
United States
Custom Capabilities
Color is customizable. Minimum order quantities may apply and will require extended lead times. Contact your local representative for complete order requirements
Lead Time
Approximately 7 - 10 business days
Technical Specifications
Impact Resistance
EN14617-9 tested. Results between 3.4-7.35
Overall Thickness
3
Size
126 in x 61 in
Total Weight
0.79 in (2 cm) thick = 10 lbs/sqft, 1.18 in (3 cm) thick = 15 lbs/sqft
Installation varies depending on application. Typically, support is required every 24in. Wet fabrication process must be used when cutting, routing, and finishing. Wear a dust mask and ensure there is proper ventilation to avoid potential hazards from silica dust. Refer to the Specification PDF for additional information
Recommended Adhesive
Use Wilsonart Hard Surface Adhesive for seam bonding. Pigmented knife grade adhesives are also acceptable. A mildew-resistant elastomeric sealant for filling gaps between countertops and terminating substrates is recommended in wet environment applications. For wall cladding applications, use 100% silicone when adhering to substrate.
Suitable Substrates
For wall cladding applications, use cement board (Durock or equivalent). The substrate surface must be sound, flat, smooth, and free of dust or other contaminates during installation. Sub-wall must be sound and able to support the weight of the material.
Performance Metrics
Abrasion Wear Resistance
ASTM C501 tested. Result of >100in-lbs. EN14617-4 tested, Result of 23.6 – 27.5
Compression
ASTM C170 (Compressive Strength; One Axis - Dry) tested. Result of >20,000psi
Flammability
ASTM E 84 tested. Class A / Class 1
Flexural Strength
ASTM D 790 (Flexural Strength) tested. Result of >6000psi. Passes 31 to 75 psi EN14617-2.
Light Blocking
Complete
Maintenance
For everyday cleaning, wipe surface with a soft cloth, soap, and water. A mild household cleaner such as Windex®, Green Works® or 409® are acceptable. After cleaning, towel dry to avoid streaks. Spills should be wiped up immediately. No sealing or polishing necessary. Avoid bleach, oven cleaners and abrasive pads or powders
Water Absorption
ASTM C97 and EN 14617-1 tested. Result of <0.03%
Weather Resistance
ISO 4586 tested for High Temperature Resistance. No Effect to Slight Effect
Sustainability
Human Health
Human Health Impact
CDPH Standard Method v1.2-2017, Declare Product Label, Declare Product Label - LBC Red List Approved, Health Product Declaration (HPD), Low Emitting/Low VOC, NSF/ANSI 51 Certified Food Equipment Materials, UL GREENGUARD, UL GREENGUARD GOLD
Climate Health
Climate Impact
ISO 14001 Environmental Management System (EMS)
Ecosystem Health
Ecosystem Health
ISO 14001 Environmental Management System (EMS)
Circular Economy
Circular Economy
Declare Product Label, Declare Product Label - LBC Red List Approved, Health Product Declaration (HPD)
