Intended for commercial project specification only.
Sub-brand Name
GEOS
Warranty
Backed by a 15 year warranty
Manufacturer Notes
Minor variations in the surface may be felt with a bare hand. These are part of the aesthetic and are not a defect unless they are deeper than 0.0625in. Be careful not to damage surface by sudden changes in temperature. The use of a hot pad or trivet is always recommended to prevent thermal shock
Material & Finish
Construction
Vibro-Compaction
Content
Crushed recycled glass, and pigments bound together with a polymerized orthophthalic polyester resin. Selected colors also contain sea shells. Does not contain cement.
Finish
Polished
Format
Panel / Sheet
Availability & Procurement
Availability
Confirm Stock Level with Sales Rep
Country Of Origin
China
State Of Origin
Virginia
Technical Specifications
Edge End
Edges should be rounded or chamfered to a minimum of 0.0625 in. Inside corners without a seam require a minimum of 0.25 in radius to reduce stress. Does not apply to two-piece seamed solutions. Outside corners should have a minimum radius of 0.125 in
Length
118
Overall Thickness
3
Size
63 in x 118 in
Total Weight
18 lbs/sqft for 0.75 in thickness. 12 lbs/sqft for 1.25 in thickness
Applications & Usage
Application Filter
Bath|Countertop|Kitchen|Wall
Installation
Stone working/diamond tooling must be used for cutting, shaping, and polishing. Do not install on any cabinet or base that cannot support a minimum of 18 lbs/sqft. Seams must be supported on both sides of the seam on front and back. Seaming over or through an appliance is not recommended. Recommended seam width is less than 0.0625in. Adhere to cabinets or base using dabs of flexible adhesive. Do not use mechanical fasteners directly with the surface or install over existing countertops. Refer to the Fabrication and Installation Guide for additional information
Performance Metrics
Abrasion Wear Resistance
ASTM C 170 tested. 875mg weight loss
Flammability
ASTM E84 Class A / Class 1
Hardness
ASTM 2583 (Barcol Hardness) tested. Average of 83.3.
Light Blocking
Complete
Maintenance
Wipe down using a damp soft cloth. To remove surface debris, use a soft cloth and mild cleaner. Do not use chlorine bleach, ammonia, oven cleaners, Comet?®, Soft Scrub?®, SOS?®, Lime Away?®, products with pumice, paint removers, furniture strippers, citrus based cleaners, or tarnish cleaners on or near the surface, as these contain harsh chemicals and/or abrasives that can cause damage. No sealing required
