Pre-casted. Engineered from Portland cement with reclaimed fly ash and recycled marble & granite chips. Poured into a mold and vacuum-packed with vibro-compaction
Content
Stone, Cement, Marble & Granite Aggregates
Finish
Honed, Riverwash, Microlinen and Polished
Format
Slab
Availability & Procurement
Availability
Typically Stocked
Country Of Origin
United States
Custom Capabilities
Bespoke sizes and designs available upon request. Colors, matrix, size of aggregate, placement of aggregate and shape of aggregate may all be custom created to produce an exclusive product. To-scale drawings must be submitted. Lead time and quotation will be given once drawings are received. Technical data may vary somewhat with each color blend
Can be installed using butt joint method. Use adhesives specially developed for laying stone and cement agglomerates. Refer to Installation Guide for additional information
Performance Metrics
Abrasion Wear Resistance
18.40 cm3/50 cm2
Antimicrobial Note
Non-porous surfaces do not support microbial growth or allow moisture to accumulate.
6.90 Mpa; ASTM C-120 Modulus of rupture Tested. Dry result of 1,800 psi. Wet result of 800 psi
Light Blocking
Complete
Maintenance
To maintain surface luster, wet mop with a neutral detergent. Rinse thoroughly with clean water and let dry. Avoid cleaning products that contain acid, alkaline detergents, strong solvents or paint strippers. To restore waxed surface gloss, coat periodically with diluted finish wax
Tensile Strength
ASTM D-209 Tested. Dry result of 600 psi. Wet result of 450 psi
