Typically Stocked, Quick Ship, Stocked in North America
Country Of Origin
Spain
Lead Time
1 day
Manufacturing Location
Spain
Order Increments
Pieces per Box - 12, Sqft per Box - 10.32
Technical Specifications
Grout Width
0.06 in
Overall Thickness
10.3
Size
7.87 in x 15.74 in
Tile Type
Field Tile
Applications & Usage
Application Filter
Bath|Kitchen|Wall|Wall/Backsplash
Installation
It is recommend to dry-fit your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation. To avoid affecting the color of the tile, white thinset such as Bostik PM is highly is recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set. Apply as much adhesive as can be covered within 10-15 minutes. 3/16in or 1/4in square notch trowel should be used when installing our marble material and ridges should be smoothed down with the flat side of the trowel prior to fixing the tiles in the mortar bed
Recommended Grout
Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8 inch or smaller
Performance Metrics
Hardness
3 MOHS
Light Blocking
Complete
Maintenance
Highly recommended to purchase the Unpolished Porcelain Maintenance Kit. Porcelain tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your porcelain tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although porcelain tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean porcelain tile surfaces. For cleaning unpolished surfaces, follow these instructions: Sweep or vacuum dust and debris from the floor. When sweeping, use a soft-bristle broom and sweep in 2 directions. First follow the direction of the tile, and then sweep diagonally. This will ensure the removal of all foreign material that might be residing in the texture. Saturate the tile with a neutral cleaning solution, such as vinegar, with hot water and stir. Allow the cleaning solution to remain on the floor 5 – 10 minutes. Scrub the floor with a brush; again using a two-direction method. Rinse the floor with clean, clear water to remove the cleaning solution. For high traffic locations, it is recommended to clean the floor at least once per day and wet mop at regular intervals
