Dry-lay the mosaic and make sure everything lays out and fits properly. When dry-laying individual sheets (e. g. layout on floor before installation) - be sure the floor surface is clean and not releasing humidity, which can re-activate the tile sheet mounting adhesive (i. e concrete or porous surfaces). All Artaic mosaic installations should follow the applicable TCNA and ANSI installation standards for each installation. It is the user’s responsibility to determine the condition and suitability of all surfaces before application. Tape is adhered to the front face of the mosaic sheets. DO NOT install this side into the setting material
Recommended Adhesive
Cementitious or epoxy-based thinset material. Unsanded cementitous, Epoxy or Urethane-Based; Water-Proofing/Anti-fracture Membrane
Performance Metrics
Light Blocking
Complete
Maintenance
Use only a mild, pH-neutral detergent cleaner and damp sponge, mop or rag (or similar product) to clean your mosaic. Acid, alkaline, and solvent-base cleaners can damage and/or discolor the tiles and grout. Do not wax any part of your mosaic. Do not let stains sit on your mosaic's surface for extended periods. Clean promptly
