EN ISO 11640 Color Fastness Of Leather To Rubbing is greater than or equal to 3 at 50 cycles dry, greater than or equal to 3 at 20 cycles wet
Adhesion Of Coating
EN ISO 11644 Finish Adhesion 2 N/cm
Elongation
EN ISO 3376 Measure % Elongation = 80%
Flammability
CAL 117; NFPA 260 Cigarette Ignition Class 1; FMVSS 302
Light Blocking
Complete
Lightfastness
ISO 105-B02 Color Fastness Of Leather To Light - Xenon Lamp Grey Scale is greater than or equal to 3
Maintenance
For Spots and Spills: Blot excess liquid immediately with a clean absorbent cloth or sponge. If necessary, use clear, lukewarm water and gently wipe spill. Dry with a clean towel and allow to air dry. If water is used, clean the entire area where the spill occurred. For Stubborn Spots and Stains: Use a mild solution of soap and water. Apply the solution to a clean wet sponge and wash, then rinse well. Let air dry naturally. Always try the cleaning method in a hidden area first to convince yourself of the results
Tear Strength
EN ISO 3377-1 Tear Strength (Single Edge Tear) > 20 N Minimum
Tensile Strength
EN ISO 3376 Measure Tensile Strength is greater than or equal to 8 Mpa, Measure of % Elongation is less than or equal to 80%
