Laminart®, Inc. expressly warrants that its products are free of defects in material and workmanship, are of merchantable quality, and meet or exceed performance standards for high-pressure decorative laminates as established by NEMA, LD 3-2005. Please note that some Laminart® products contain special pearlized inks and do not meet NEMA standards for abrasion/scratch resistance in all finishes. Inasmuch as Laminart has no control over the end products fabricated with the materials sold, no warranty or guarantee is expressed or implied, other than those set forth above, and is limited to the replacement cost of the material alone
Material & Finish
Construction
Phenolic resin-impregnated kraft sheets laminated with melamine resin-impregnated decorative and overlay sheets
Content
Phenolic resin-impregnated kraft sheets laminated with melamine resin-impregnated decorative and overlay sheets
Finish
Brushed
Format
Panel / Sheet
Availability & Procurement
Availability
Typically Stocked
City Of Origin
Longeville-en-Barrois
Country Of Origin
France
Technical Specifications
Overall Thickness
28
Size
4ft x 10ft Sheet
Applications & Usage
Application Filter
Wall
Installation
Refer to the Installation Sheet PDF
Suitable Substrates
Suitable substrates may include but are not limited to particleboard (minimum density 45 pounds/cubic foot), medium-density fiberboard (MDF) or high density fiberboard (HDF). Materials with insufficient dimensional stability or internal bond strength such as plywood, steel, aluminum, fiber reinforced plastic, plaster, gypsum board, and similar materials are not recommended for use as substrates.
Performance Metrics
Abrasion Wear Resistance
EN 438 - = 50 cycles
Flammability
Fire Rating, ASTM E 84 Class II
Flexural Strength
EN 438 Bending Radius - 4.72 in
Maintenance
Metal-Art should be cleaned with a damp cloth and gentle, rubbing motion. Paper towels not recommended. If necessary, ordinary soap or household cleaner may be used for more difficult stains. Avoid abrasive cleaning products, solvents, polish or scrapers. For post fabrication stain removal, it is recommended that the cleanser be tested first in an inconspicuous area
Sustainability
Human Health
Human Health Impact
Formaldehyde Free, Health Product Declaration (HPD), Low Emitting/Low VOC, PVC free, CDPH Standard Method v1.2-2017, UL GREENGUARD, UL GREENGUARD GOLD
VOC Emissions Testing Methodology
CDPH / CHPS 01350 Compliant
Climate Health
Climate Impact
CARB Compliant, ISO 14001 Environmental Management System (EMS), Environmental Product Declaration (EPD)
