Slabs are pressed with tons of pressure and fired at more than 1200° so that the different materials are sintered and concentrated into a single solid mass
Content
Porcelain
Finish
Polished or Matte
Format
Modular, Panel / Sheet
Surface Sheen
Glossy, Matte
Availability & Procurement
Availability
Typically Stocked
Country Of Origin
Italy
Lead Time
16 weeks
Order Increments
Sold by the box
Technical Specifications
Impact Resistance
ISO 4211-4 - No damage to ball drop 400mm, EN 14617-9 - Average Value 3 J
EN 14617-1, ASTM C97 -Average Value 2500 kg/m3 Density
Light Blocking
Complete
Maintenance
Slabs are very practical and do not require special cleaning methods, being the same vitrified and therefore stress-resistant, resistant to heat, scratches and the majority of abrasive agents. In general, ordinary cleaning is carried out only with the use of hot water applied with a cloth or sponge. Correct and timely cleaning at the end of the work is of fundamental importance, especially from surfaces with a glossy finish. In particular, the plate must be washed with clean water and subsequently dried. All processing residues such as fillers, mastics or silicones must then be removed, possibly before their final hardening. Avoid the direct use of hydrofluoric acid or its derivatives. In general, ordinary cleaning is carried out only with the use of hot water applied with a cloth or sponge. Avoid the direct use of hydrofluoric acid or its derivatives. Metodo CATAS - Excellent (high degree of removal of bacterial cells >99% after cleaning with a biocide-free detergent)
