Interlayers are laminated between two PETG resin panels, fusing them into a solid sheet. Sheets are peel-coated with a protective film and trimmed to size
Content
Co-Polyester Resin
Finish
Grain, Grid, Patent, Patina, Sandstone, Stucco, Supermatte, Vellum and Velvet
Format
Panel / Sheet
Availability & Procurement
Availability
Made to Order / Special Order
City Of Origin
Salt Lake City
Country Of Origin
United States
Custom Capabilities
Custom select the color, pattern, texture, interlayer and finish
Lead Time
4 weeks
State Of Origin
Utah
Technical Specifications
Dimensional Stability
Will expand and contract nominally with fluctuations in temperature
Edge End
Can be machined or routed into a variety of different forms. Sanding, polishing, or flame polishing options are also available. Panels containing certain woven, paper or organic interlayers must be sealed if exposed to water
ASTM D638 Tested. Between 4.8% - 5% at yield and 40% - 50% at break
Flammability
Class A: 1/16 in, 1/8 in, 3/16 in, 1/4 in, 3/8 in, 1/2 in, 1 in Class B: 3/4 in; ASTM D2843 Smoke Density - Pass Less than 75; ASTM D635 Flame Spread - Pass CC1; ASTM D1929 Self-Ignition Temperature - Pass Greater than 650°F; Materials complying with Section 803.1.1.1 (NFPA 286) shall be considered to also comply with the requirements of ASTM E84 Class A
Flexural Strength
ASTM D790 Tested. Bewteen 11,200 psi - 12,000 psi depending on material thickness
Rinse the sheets with lukewarm water. (Be careful not to expose edges of organic or fabric interlayers to water) Remove dust and dirt from Varia with a soft cloth or sponge and a solution of mild soap and/or liquid detergent in water. A 50:50 solution of isopropyl alcohol and water also works well. Rinse thoroughly with lukewarm water. Always use a soft, damp cloth to blot dry. Rubbing with a dry cloth can scratch the material and create a static charge. Never use scrapers or squeegees on Varia. Also avoid scouring compounds, gasoline, benzene, acetone, carbon tetrachloride, certain deicing fluids, lacquer thinner or other strong solvents
Performance
Meets the requirements of ANSI Z97.1
Tensile Strength
ASTM D638 Tested.7,700 psi at yield and 3,800 psi at break
