FENIX NTA® is a material produced by simultaneous application of heat and pressure, in order to obtain a homogeneous non-porous high density product
Content
The core structure is composed of paper, impregnated with thermosetting resins. The outer surface is made of a real metal structure substrate treated with next generation acrylic resins applied to the substrate as a multilayer coating and subsequently, cured via an electron beam process
Can be machined with standard carpentry tools. Cutting, milling, drilling, edging, bending and gluing are possible
Performance Metrics
Abrasion Wear Resistance
EN 438-2:2019 cl.10 - = 200
Lightfastness
EN 438-2:2019 cl.27 - = 4
Maintenance
Usually warm water is highly effective. As FENIX is a strong material, you can also use any household cleaner, like all-purpose cleaners, disinfectants, degreasers or limescale removers. If needed, even acetone can be safely used (always follow the health and safety instructions on the bottle). To avoid damaging the structure, don’t scrub your FENIX® surface with abrasive cream, a scouring pad or a hard brush. In the long term, doing this might lead to a glossy spot on your matt surface. However, a wet melamine eraser can be used to remove a tougher stain. As a final step, always rinse with plenty of warm water and wipe dry with a clean cloth. The water removes dirt, residues from cleaning liquids and particles of a melamine eraser, that could otherwise stay behind in the structure. The clean cloth absorbs water and therefore avoids limescale residues that may cause a change in appearance
