Highly customizable. Select custom colors, patterns, slab sizes, or glass styles. Take it a step further by reclaiming the glass from a remodeling project to repurpose it into a distinctive surface of your own design. Incorporate urban forested wood, recycled steel, shells, or other aggreate options
Lead Time
4 weeks approximate lead time
State Of Origin
Illinois
Technical Specifications
Edge End
Top and bottom edges on straight runs, and cut-outs should be rounded over or chamfered to a minimum of 0.0625 in. Polish edges with 200 grit and finish with a Gray Scotch Brite non-woven fine grade silicon carbide disk or comparable product
Overall Thickness
3
Product Features
Customizable
Size
Available in three standard sizes - 28 in x 109 in, 46 in x 109 in, or 62 in x 109 in. Can be manufactured to custom sizes by request
Cabinet or base must be able to support a minimum of 28 lbs/sqft. Stone working/diamond tooling should be used for cutting, shaping, and polishing. Radius cut-outs are recommended but square cut-outs are permitted as long as saw-cut in corners does not extend beyond the corner. Rodding is to be used on overhangs 6ins or larger, sink fronts, and over dishwashers or other appliance gaps in the substrate. For surfaces installed between walls, a minimum of 0.0625in gap is required at each end. Caulk the gap with a flexible adhesive. Fasten to cabinets or base using dabs of flexible adhesive. Do not rigidly adhere surface to other materials such as wood or steel. Never install using mechanical fasteners. Refer to Installation Instructions for additional information
Recommended Adhesive
Lamination of surfaces should be done using a 2-part epoxy adhesive. Use color-matched or clear, knife grade-type epoxy, to fill-in noticeable voids in edges after cutting.
Performance Metrics
Hardness
7 N/mm^2
Light Blocking
Complete
Maintenance
For routine cleaning, use Murphy’s Oil Soap or any other mild soap or household cleaner and a dish cloth, sponge or white Scotch pad and wipe up spills as they occur. For stubborn or dried on deposits, use a cleaner/polisher like Barkeeper's friend or Bon Ami with a sponge or damp cloth and rub in a circular motion. Bleach, harsh chemicals or abrasives are not recommended. To restore luster, apply a light layer of mineral oil and wipe off excess after application or, use Tenax Tiger Ager and follow instructions on label. No sealer required
Build America, Buy America Act (BABAA) Compliant, Ethical Trading Initiative (ETI), Made in USA, SBE: Small Business Enterprise, WBE: Women Business Enterprise, WMBE: Women/Minority Business Enterprise, WOSB: Woman-Owned Small Business
Circular Economy
Circular Economy
100% Recyclable, Declare Product Label, Declare Product Label - LBC Red List Approved, Health Product Declaration (HPD), Manufacturer Take-Back Program, Recycled Content, Recycled Content - Post-Consumer
Certifications & Disclosures
LEED
May contribute to LEED Materials and Resources credits
