Resistance to Impact with a Small Diameter Ball: DIN EN 438-2–20 - 20 N (min); Resistance to Impact with a Large Diameter Ball: DIN EN 438-2–21 - 800 mm Drop height (min.); 10 mm Indentation diameter (max.)
Size
Made to Order: 3050 mm x 1320 mm x 7.8 mm, 2590 mm x 1320 mm x 7.8 mm
Applications & Usage
Application Filter
Bath|Wall|Wall/Wet Wall & Shower Wall
Performance Metrics
Abrasion Wear Resistance
EN 438-2-10 - =150 revolutions
Flammability
EN 13501-1 Building material Class - E. Ignition Tempature Approx. 400 °C. Extinguishing Agents Class A. Explosion Hazard Dust Class ST-1
Light Blocking
Unknown
Lightfastness
EN 438-2-27 - 4 to 5 Grey scale (Xenon arc lamp)
Maintenance
The surface of RESOPAL SpaStyling Boards is neither corrosive nor oxidising. They do not require any further surface treatment (e.g. with lacquers or paints). All decorative RESOPAL HPL surfaces can be cleaned with mild soap solutions. Stubborn stains (e.g. lacquer) can be removed with organic solvents (e.g. ethanol, acetone). Abrasive cleaning agents (e.g. scouring powder, steel wool) must not be used as these alter the surfaces. Strongly colouring substances may leave slight stains on the surface of RESOPAL SpaStyling Boards. To avoid aesthetic changes, these stains must be removed immediately after exposure. Please always carry out cleaning tests with any cleaning agent on non-visible areas at the beginning. In the case of heavy soiling, prolonged exposure to the cleaning agent can help to remove the soiling completely. At the same time, aggressive substances can change or damage the surface if they are left on the RESOPAL HPL surface for too long. Changes to the surface of RESOPAL SpaStyling Boards (e.g. scratches, abrasion marks, dirt) that may occur through daily use are signs of wear. Special attention should be paid to particularly matt and glossy surfaces. The usual surface changes, such as micro-scratches and gloss deviations, become more visible and are even more pronounced in combination with dark decors
Stain Resistance
EN 438-2-26 - Rating 5 (Groups 1 and 2); Rating =4 (Group 3)
Sustainability
Human Health
Human Health Impact
RoHS Compliant
Climate Health
Emissions
Formaldehyde Emission: EN 16516 - Class E1 (< 0.1 ppm); Emission of Volatile Organic Compounds (VOC) - EN ISO 16000-9 - A (scenario wall)
