Bolla

Felt Paneling

Overnight

Commercial

Collection Name: Muto Texture
Manufacturer SKU: MUTO Bolla
Product Name: Bolla
Warranty: 2 years
Manufacturer Notes: PET felt is made from 100% recyclable polyester plastic. Slight and conistent variations in color, density, texture are inherent to this core material and should be expected. Color, density and texture will vary by dye lot. MUTO is made with a ‘felting’ process which results in a textural heathered effect where the fibers consist of multiple tones and shades

Availability: Made to Order / Special Order
Country Of Origin: United States
Custom Capabilities: Custom print colors available. (contact your sales representative for details)
Lead Time: 2-3 weeks

Application Filter: Wall
Installation: Adhesive - Use standard construction adhesives (Liquid Nails | Titebond) and apply to the back of the panel maintaining at least a 1in border around the perimeter. Adhere to substrate providing bracing to hold material in place per adhesive curing time instructions. Zclip Hardware - Attach clips to the back of each panel with screw length to accommodate for the thickness of specified pattern. Anchor to substrate as required. Stand Off Hardware - Using barrell and cap, secure panel and anchor to substrate as required. Six anchor points recommended for full sized panel.

Acoustics: NRC Rating 0.35 or greater
Light Blocking: Complete
Maintenance: Vaccum to remove dust. Remove spills immediately using a damp cloth or soap and water. Carpet and fabric cleaners may also be used. (Always test an inconspicuous area first.). Compressed air may be used to dust in difficult or hard-to-reach areas. To disinfect, bleach can be used in accordance with CDC Cleaning & Disinfection instructions. The soltuion ratio is 5 tablespoons of bleach to 1 gallon of water, 4 teaspoons of bleach to 1 quart of water. Apply solution by spray and wipe off immediately. (Always test in an inconspicuous area first.)